How To Fix: One Earbud Not Working [Left Or Right] EASILY!

Below is an article on the topic How To Fix: One Earbud Not Working [Left Or Right] EASILY! compiled by the editors of Gootoplist.com. Gootoplist - a general information page about useful tips for life

Whether you are using wireless headphones or wired, anything going wrong with them can be extremely frustrating.

Imagine listening to your favorite tunes on your Galaxy Bud, Jabra elite, or talking to your friends/family over a video call, or playing the latest video game, and suddenly you lose audio in one side of the headphones! 

Frustrating right? We got the solution for you.

Here is a quick check before we begin.

One side headphone not working is a common problem that most of us face and here is a list of possible issues to check.

As you can see there are a variety of issues that could result in an earbud not working and now we will look at each problem and give you a detailed solution. If none of the above is the cause, review the details in the article to fix one earbud not working

Also, just in case you are looking for a true wireless solution – we recommend Bose QuietComfort Noise Cancelling Earbuds. They are the Best in class earbuds and offer a great experience!

Here are some quick fixes to try.

Well, to fix the issue of one earbud not working, there are several solutions.

If none of the above resolves your problem. Read on.

Mentioned below is a list of possible problems with their resolutions. It is recommended that you go through them one by one to see if the resolution helps fix your problem. If it doesn’t move on to the next one.

If you are using a wired headphone then the first thing you do in this troubleshooting process is to check if the headphone jack has been inserted properly or not. When you insert the headphone jack into the headphone slot on the device you are using, there should a slight click once it is inserted completely.

If the jack hasn’t gone into the slot in the proper manner, then you might face issues with an earbud not working. Sometimes, you might even experience one headphone louder than the other issue.

Therefore, disconnect your headphone from the device and once again insert the jack properly. See if the problem got fixed or not. In case you have an xbox you can check our guide on can i use regular headphones with xbox one

While you are at it, inspect your jack to see if it is dirty. As a precaution, take a cotton swab, dip it in water, and then squeeze out excess water from it.

Clean the headphone jack with the cotton swab to remove any dirt or dust from it.

Once done, take a dry cloth and remove all moisture from the jack. Reconnect it and check the performance. In case of pairing issues, you may check out this guide.

Improper audio balance settings can also result in one side earbud not working. To confirm if this is the issue or not, go into the Settings of your mobile or computer. There you will be able to see an option for Sound or Audio. Click on those and find the section for Audio Balance or Sound Balance.

The setting for the Balance should be in the center. If you see that it isn’t aligned correctly, then drag the slider and move it to the center position. Apply the settings once you are done. Reconnect your headphones and check to see if the problem has been resolved or not.

You could also restart your device once you make changes to the settings. This sometimes helps. Also, you should check out can i use iphone headphones as a mic on pc?

Mono sound is a setting in which the same sound is sent to both sides of the headphones. Sometimes, without us knowing, we listen to mono tracks and the sound only plays on one side of the headphone.

This could be a problem you could be facing. On your device, go to Settings and looks for Sound or Audio settings.

There you will see an option for Mono Sound or Mono Audio.

Make sure you disable it and then recheck the audio on your headphones. In some devices, the option for Mono Audio could be under Ease of Access options. Do remember to check it there as well. Also, check out our guide on how to use lightning headphones on laptop!

After prolonged usage, it is quite possible that your earbuds have been dirty and have got clogged. Closely inspect the defective side to see any dirt, dust, or ear wax accumulation. In case you find it dirty, follow the next steps.

Use a vacuum cleaner with a narrow opening to suck the dirt out of the earbuds. After vacuuming, wipe off the earbuds with a cotton swab dipped in lukewarm water or an alcohol-based cleaner.

If you use headphones with removable covers then it might be a good idea to take them out and clean them with lukewarm water.

If your headphones don’t have a mesh then you can take some lukewarm water in a bowl and dip cotton swabs in it.

Remove excess water from the cotton and clean your earbuds. This should remove any substance that might be blocking them.

If there is ear wax on your headphones, you can first dry dust them. To do this, use a soft brush like a hairbrush or a paintbrush to wipe the ear wax off the headphone. Once this is done, you can follow the steps mentioned above to clean the headphones.

The first thing you need to do is to straighten out the headphone wires. Tangled wires aren’t good for durability and lead to performance issues.

Once you straighten it out see if it help solve your problem. If it didn’t then twist a small section of the wire from one end to another.

Keep your earbuds connected to the device and play some audio.

While twisting, sometimes tangled internal wires are set free and the problems go away. Closely check every portion of your headphone wires to see if there is any damage to them.

Tangled wires or ones that are cut often result in some issue.

If you do find a cut in the wire, use electrical tape to cover it. Wrap the entire affected section tightly with the wire and then check to see if the problem went away.

If it did, then make sure that the wire never comes off from the headphones/pair of earbuds for a permanent fix.

When you face the issue of one side earbud not working, there could be a possibility that the device has a problem and not the headphone. To confirm, use another new pair of headphones on the device to see if the problem persists.

If it does, then it means that you need to get the device audio slot serviced.

Sometimes, dust accumulation leads to issues in pair of earbuds. Disconnect your earbuds from the slot and then see if there is any dirt inside the slot.

If you see some, take a cotton swab and then roll it into a thin shape.

Dip this into lukewarm water, squeeze out excess water from the new pair of earbuds and clean the inside of the jack.

Then, take a dry cotton swab and dry the headphone slot. Any liquid left behind can permanently damage your device.

All our electronic devices are prone to water damage even if they claim to be waterproof or water-resistant. Headphones are exposed to sweat, rain, and precipitation so it’s likely such a thing could have damaged the earbuds on one side.

If the damage was done very recently, then without doing anything put your headphones/ pair of earbuds inside a container of raw rice.

Rice has the ability to suck out moisture and do the same with your headphones. Keep them in the rice for a couple of hours and then see if they work or not.

In case, you don’t have rice at home then what do you do? There are some replacements to rice such as dry oatmeal, synthetic desiccant packets, couscous pearls, etc.

Diagnosing Bluetooth speakers requires a different set of troubleshooting steps. If you face the issue of one side earbud not working on a wireless headphone then the first thing you need to do is to unpair them.

Now keep the power button on your headphone pressed for a few seconds till the power indicator flashes blue or red.

This usually helps the factory reset the headphones. After you restart the headphones, pair them with your device once again. This should help fix your problem.

A half-point issue happens when the audio gets stuck during transmission. If you are using a wireless headphone that comes with a wireless jack, then first take it out from the device.

While the audio is still playing, reinsert the jack into the audio slot. If the audio plays in both earbuds then it was a half-point issue that is now rectified.

Connect another pair of headphones into your device and if the problem persists, then there is a problem with the device and not the headphones. Follow steps 2, 3, 6, and 9 for resolution.

Even after doing this, if the problem doesn’t go away then you might need to reset your device/restore it to factory settings.

Take a data backup and reset your device. Sometimes, software glitches or viruses can cause issues with connected bluetooth earbuds and accessories. Resetting your device can help fix these problems.

In step 4, we explained how you could inspect your wired headphones for any wire damage. If you do find it, then here are some steps you can follow to repair them at home.

Well, if you have tried all the troubleshooting steps mentioned above and still failed to rectify your bluetooth headphone/earbuds issue in one ear, then there are only a few other options left.

If your headphones have gone kaput, then there is no option but to get them replaced. It is quite painful especially if you purchase expensive ones. So, next time when you go in for a new set of headphones, buy a good pair from a trusted manufacturer.

Hopefully, the steps listed above helped resolve the issue of one side earbud of bluetooth earbuds not working properly in one year.

To ensure that you don’t face such problems in the future, it is essential to take care of your wired or wireless earbuds.

Here are some measures you can follow to keep your bluetooth headphones/earbuds safe and away from damage.

Here is a quick fix for Apple Airpods Not Working on Left side and Right site, Watch this Video

Here is how to fix Fix Right or Left Earbud Not Working watch this video

Wired or wireless headphones, all are prone to malfunction and damage due to daily use. When you face issues, don’t panic.

Follow all the steps mentioned in the order that is written here.

Sometimes, the issue could be with a device setting, loose jack, or tangled wires. Using simple methods, you should be able to resolve the problem of one side earbud not working.

Throwing away faulty earbuds always seems to be the easy way out. But it can cost you a lot of money if you keep discarding them every time your earbuds go bad. Fixing them yourself is always more economical, saves you the hassle of buying new ones or getting them repaired. Before you go, check out Windows sonic for headphones – a special feature that makes listening to music a treat!

If you can’t Fix it.  Buy a new One.  Here are Top 5 Best Selling Deals for you.

Depending on your audio device settings, headsets may play only in one ear. Check your audio properties to ensure that the mono option is not enabled. Furthermore, ensure that the voice levels on both earbuds are balanced.

Here is how to Repair Wireless Headphones when Only Work On One Side works.
1. Examine the side balance.
2. Check to see if your track is mono or stereo.
3. Turn off and on your headphones.
4. Restart Bluetooth Device.
5. While the audio is playing, insert the sound cable plug.
6. While playing audio, pull the sound cord back.
7. Reset your wireless earbud.

Place one earbud on the desk in front of you and press and hold both for 8 seconds until they switch off. Place for a few seconds in the cradle. Remove them from the cradle. Hold down on both until they turn on and start flashing.

If you only hear audio from the left side of your headphones, check to see if the audio source supports stereo output. IMPORTANT: A mono device will only produce sound on the left earbud. In general, a device with an output jack labeled EARPHONE will be mono, whereas a device with an output socket labeled HEADPHONE will be stereo.

Evan Grant

A Musician, headphones lover, boyfriend and also the lead Editor of ElectricFieldsFestival, Evan Grant is the guy who runs this site. He's a great Roger Federer fan and is always up for a game of Tennis.

Are Noise Cancelling Headphones Safe? (Find Out Here Now!)

A good pair of noise-cancelling headphones is a welcome respite in a world that is noisier than ever. It feels great sometimes to block out all the unnecessary distractions of daily...

Are Noise Cancelling Headphones Bad For Your Ears? (Detailed Answer!)

Noise-cancelling headphones are intended to block out outside noise. This is ideal for people who work in loud environments, such as construction workers or factory workers. It's...

Hi, I’m Evan!

I was tired of reading useless and misleading guides on buying musical gears from so called clueless “Professional Musicians” and thus ElectricFieldsFestival was created by me and my fellow musicians. You can trust us blindly when it comes to choosing the right musical gears.

www.electricfieldsfestival.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Above is the article How To Fix: One Earbud Not Working [Left Or Right] EASILY! shared by Gootoplist team. Next, I also write an article related to this article to synthesize the knowledge about how to fix earphones Hope to bring you useful information, thank you for your interest and follow. track!